Overview
In this experiment, you will learn how to use Humiture Sensor DHT11 module. After you take all the steps, you will see the temperature & humidity data collected by DHT11 displayed on Serial Monitor.
Components
– 1 * SunFounder Mega 2560
– 1 * Humiture Sensor DHT11 module
– 1 * USB cable
– 1 * 3-Pin anti-reverse cable
Experimental Procedures
Step1: Build the circuit
Step2: Program
Step3: Compile
Step4: Burn the program into the SunFounder Mega 2560 board (check the board and port selected)
Now, you can see the ambient temperature and humidity values on Serial Monitor.