Experiment 5 How to Use Gas Pressure Sensor BMP180

Share for us

Overview:

In this experiment, you will learn how to use a gas pressure sensor. The SunFounder Mega 2560 is used as the master board to read the values from BMP180 and display them on Serial Monitor.

Components:

– 1 * SunFounder Mega 2560

– 1 * BMP180

– 1 * USB Cable

– 1 * 4-Pin anti-reverse cable

Experimental Procedures

Step1: Build the circuit

Step2: Program

Step3: Compile

Step4: Burn the program into the SunFounder Mega 2560 board